Tag Archives: worm wheel animation

Good worm and worm wheel animation manufacturer China in Prague Czechia Quality R Series 3 Phase Electric Motor Coaxial Helical Gear Reducer with top quality

Good  worm and worm wheel animation  manufacturer  China  in Prague Czechia  Quality R Series 3 Phase Electric Motor Coaxial Helical Gear Reducer with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Good Quality R Series 3 Phase Electric Motor Coaxial Helical Gear Reducer

Features of R series helical gear reducer:
1.Structure: Flange-mounted, foot-mounted, small off-center output and compact.
2. Can connect with various motors, good available capability and reliability, carburized and grinded teeth, low noise, high efficiency.
3.Integral casting housing with good rigidity to enhance the shaft strength and serves life of bearing.
4.Big or small flange type installation and output through solid shaft.
5.Input types: Couple-type motor, input through shaft and input through coupling flange.

Application:
It is applied to many industrial area, such as Metallurgical, mines, lifting, transportation, petrochemical, construction, textile, pharmaceutical, food, environmental, light electric, plastic machine, paper, par ept equipment etc. Especially for Light Industry.

Advantages of R series helical gear reducer:
1. High technical contents.
2. Save space, durable, high bear ability.
3. Low consumption, superior performance, the machine efficiency is up to more than 95%.
4 .Small vibration, low noise, high energy conservation.
1. Housing: Cast Iron
2. Gears: Helical Gears
3. Input Configurations:
Equipped with Electric Motors
Solid Shaft Input
IEC or NEMA Motor Flange
4. Applicable Motors:
Single Phase AC Motor, Three Phase AC Motor
Brake Motors
Inverter Motors
Multi-speed Motors
Explosion-proof Motor
Roller Motor
5. Output Configurations:
Solid Shaft Output

R series gear units are available in the following designs:
Mounting Type:

R(-) RF RS RFS RM
Foot-
mounted
Flange-mounted Foot-mounted and Shaft In-put Flange-mounted and shaft input Specially for stirrer

R series gear units are available in the following designs:
RM… Specially for stirrer drives
R(RF,RX,RXF)…Y… When equipping the user’s motor or the special one ,the flange is required to be connected
RY :Foot-mounted helical gear units with solid shaft
RF…F: Flange-mounted helical gear units with solid shaft
RX…Y: Foot-mounted single-stage helical gear units with solid shaft
Rs: Foot-mounted, shaft input helical gear units with solid shaft
RFS:Flange-mounted ,shaft input helical gear units with solid shaft
RXF…Y:Flange-mounted single-stage helical gear units with solid shaft
R…R…Y:Foot-mounted combinatorial helical gear units with solid shaft
RF…R…Y: Flange-mounted combinatorial helical gear units with solid shaft
RXS Foot-mounted, shaft input single-stage helical gear units with solid shaft
R…RS:Foot-mounted combinatorial, shaft input helical gear units with solid shaft
RRS :Foot-mounted combinatorial, shaft input helical gear units with solid shaft

Technical Data:

Rated Power 0.18KW~160KW
Rated Torque Up to 18000N.m
Gear Arrangement Helical Hardened Gearbox
Input Speed 50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Output Speed 0.16~1571r/min
Ratio 5~264 (Max:13000)

 

Product application :

Pac ept & Delivery:

Our company :
AOKMAN® was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with a strong presence in the international market.
AOKMAN® has become a reliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.

Customer visiting:

Our Services:

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than one hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% ept payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

If you are interested in our product, welcome you contact me.
Our team will support any need you might have.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Good  worm and worm wheel animation  manufacturer  China  in Prague Czechia  Quality R Series 3 Phase Electric Motor Coaxial Helical Gear Reducer with top quality

Good  worm and worm wheel animation  manufacturer  China  in Prague Czechia  Quality R Series 3 Phase Electric Motor Coaxial Helical Gear Reducer with top quality

EconoEPT worm and worm wheel steering gear animation manufacturer China in Asuncion Paraguay al High Performance T Grid MaEPT Machine Cross Tee Machine with top quality

EconoEPT  worm and worm wheel steering gear animation  manufacturer  China  in Asuncion Paraguay  al High Performance T Grid MaEPT  Machine Cross Tee Machine with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

1. Product detail:

Product size: H*W(MM)38×35; 38×24; 38×15; 32×24; 32×15; 28×24; 28×15 etc. Length: 3600/3660mm
Any size and any demand we can do as per customer’s drawing or sample.

⊙ Main Components(A—-F):
A(2 Uncoilers for GI& PPGI) + B(Main Machine Roll Former) + C(Automatic Punching& Cutting-off System) +D(Electric PLC control Cabinet) + E(2 Hydraulic standions) + F(Run-out Table)
⊙ Main Parameter:
Stations: 18-24 Stations
Speed: 20–25M/Min(6–7Pcs/Min)
Total Power: 21.2KW(4KW+2.2KW+15KW)
PLC brand: Siemens
Xihu (West Lake) Dis.n-Machine interface: Siemens
Installation length: 14.8M
Die/Mould Material: SKD11
Customer’s Logo: Ok
Anti-Fire Hole: OK
Stitching Line: Ok
Steel Head Lock: Ok
Transmission: Worm Gearbox Reducer
Main Hydraulic station with Accumulator for stable and precise performance

A: Uncoiler/Decoiler/Coil Opener/Raw Material Shelf:
Code: MT-200;
Weight: 100kg;
Size: 1000*800*1100(mm)
Raw Material Roll :
Inner Diameter: 450-530mm
Outer Diameter: 1200mm
Loading weight: 1000kg
Make sure the GI and PPGI
Unoiler in the exact line with
Main Former Machine

☆ Station/Pass/Pinion: 18 stations
☆ Speed: 20—25M/Min(6–7Pcs/Min)
☆ Machine body: Carbon Steel, Thickness 20mm, Polished, Rust Prevention Paint Protection,Any color available
☆ Transmission: Motor 4KW, Main Transmission: Chain Drive, Between Rollers: Worm wheel Gearbox
☆ Stitch: Four Rollers real stitch, can also be used for fake stitch.
☆ Side plate: Thickness 30mm, Polish 6 sides, high precision boring
☆ Principal Axis: 45# steel, tempering heat treatment, mill grinder precise making
☆ Electric Cabinet: SIENENS PLC programmed, Touch Screen, FullY Automatic controlling system.
☆ Punching Die: Material D11, Hardness HRC 58-60, Precise milled, precise making, easy to removable parts.
Stitching Mechanism
☆ Roller: Material Cr12 Inner diameter 39mm, Min OD 90mm, HRC 55-56, Symmetry in the range of 0.05mm

C Automatic Punching and Flying Cutting-off System:
Features:
☆ Punching Die: 24 sets( 2 head locks 22 Main Tee holes)
☆ Anti-Fire Hole Die Available on Machine
☆ Cutting: Flying Cutting-Off Contineous wor ept non-stop
☆ Driving Force: 2 Hydraulic stations one for Punching mechanism travel and one for punching
☆ Accurancy: Height and Width within 0.1mm; In Length 0.3mm/Meter
☆ Die Material: 45# steel and Cr12MoV, Heat treatment Vacuum 58–60HRC
☆ Cutting off Length: 3600 or 3660mm
☆ Hole Distance: 150cm or 6″
☆ Custom Logo Punching at same time on Machine Fully Automatic

D Electric PLC control Cabinet
Features:
☆ PLC brand: SIEMENS
☆ Xihu (West Lake) Dis.n-Machine Interface: SIEMENS
☆ Inverter: Teco ZheJiang brand
☆ Switch Power: Delta ZheJiang brand
☆ Wire connection interface: Aviation plug

E Hydraulic stations
Features:
☆ Hydraulic brand: LYHP
☆ Electromagnetic valve: XIHU (WEST LAKE) DIS. brand
☆ Accumulator: Nitrogen
☆ Main Hydraulic: 15KW
☆ Secondary Hydraulic: 2.2KW
☆ Color: Any color available

F Run-out Table
Features:
Size: 3800x750x970mm
Finish: polish
Material: Stainless Steel 304 the outward surface painted protection, Any color available
This compenent is wor ept desk. Product will drop onto the table and slide out smoothly, so it avoids scratching and easy for packing. And there are waste grooves upgrade to conduct the waste steel odd ends to the barrel.

Raw material supplying rack picture :

Roll Forming Machinery:

Flying Tracing Cutting System:

For more to visit our website:    

Below are Youtube video:
Company introduction:

Kaigui Machinery is just focusing on Ceiling T-grid Roll Forming Machine in China. Almost all Chinese T bar and T Grid Factories are using our machines or let us retrofit and upgrade their old machines. My boss Mr. Jiang  enjoys high reputation in this industry. In the export market.

Many ept companies are using our factory or picture to deceive customers internationally.We are gravely announcing here: Only ZheJiang Kaigui Machinery, my boss Mr. Jiang JunQing and Erin and website: are the real and true.

3. Customer come to our factory:

4. Why choose us:
 

  • T-bar roll forming machine mould processing and designing we are specialized and No. 1 in China
  • T-bar ceiling machine performance reaches to the optimum because we have our own Electric PLC engineer
  • Suspension ceiling T-bar machine we are just focusing and dedicated this kind machine for 15 years
  • Fully automatic T-bar ceiling roll forming machine we are the first producer and leading the technology in China

5. Package:

6. FAQ:

1) Q: Are you manufacturer or ept company?
A: We are manufacturer .
2) Q: Do you provide installing and training overseas?
A: Overseas machine install and worker training services are optional.
3) Q: How is your after sales support? 
A: We provide technical support on line as well as overseas services by skillful technicians. 
4) Q: How does your factory do regarding quality control? 
A: There is no tolerance regarding quality control. Quality control complies with ISO9001. Every machine has to past testing running before it’s packed for shipment. 
5) How can I ept you that machines pasted testing running before shipping?
A:  1) We record the testing video for your reference. Or,
    2) We welcome your visit us and test machine by yourself in our factory.
6) Q: Do you sell only standard machines?
A: No. All the machinery could be customized.

If any inquiry, pls feel free to contact us!!

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

EconoEPT  worm and worm wheel steering gear animation  manufacturer  China  in Asuncion Paraguay  al High Performance T Grid MaEPT  Machine Cross Tee Machine with top quality

EconoEPT  worm and worm wheel steering gear animation  manufacturer  China  in Asuncion Paraguay  al High Performance T Grid MaEPT  Machine Cross Tee Machine with top quality

0.12kw~15kw worm and worm wheel steering gear animation shop China in Amara Iraq Wpwo Vertical Shaft Type Worm Gearbox with top quality

0.12kw~15kw  worm and worm wheel steering gear animation  shop  China  in Amara Iraq  Wpwo Vertical Shaft Type Worm Gearbox with top quality

We – EPG Team the biggest worm gearbox, couplings and gears manufacturing unit in China with five different branches. For a lot more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /

We are a specialist manufacturer with 10years’ experience, welcome for the inquiry and checking out.

 

ept model .12kw~15kw WP Series ninety Diploma Worm Gearbox

Parts:
1. Housing: Solid Iron
two. Gears: Worm Gears, one phase
three. Input Configurations:
Strong Input Shaft
Motor Flange – IEC B5
4. Output Configurations:
Sound Output Shaft
Hollow Output Shaft
 

Attributes:
1. Different variants, equally enter and output shafts can be mounted horizontally or vertically
two. Compact structure
three. Direct travel or oblique generate available
four. Output could be reliable shaft or hollow gap
 

Models & Variants:
WPA Sequence – Reduce Input Shaft
WPS Sequence – Higher Input Shaft
WPDA Collection – Lower Enter Flange
WPDS Collection – Upper Enter Flange
WPO Sequence – Vertical Upward Output Shaft
WPX Series – Vertical Downward Output Shaft
WPDO Sequence – Vertical Upward Output Shaft, Input Flange
WPDX Sequence – Vertical Downward Output Shaft, Input Flange 

Gearbox Parameters

Type: gearbox WP
Product: WP 40-250
Ratio: one:10,fifteen,20,twenty five,30,forty,50,sixty
Shade: Blue/Silver Or On Client Ask for
Material: Housing: Die-Forged Iron solid
Worm Equipment-Copper-nine-four#
Worm-20CrMn Ti with carburizing and quenching, area harness is fifty six-62HRC
Shaft-chromium metal-45#
Packing: Carton and Wooden Scenario
Bearing: C&U Bearing
Seal:                       KSK
Guarantee: one Yr
Input Electricity:   

.12kw~15kw                                                                   

Usages: Industrial Device: Foods Stuff, Ceramics,CHEMICAL,Packing,Dyeing,
Woodworking,Glass.
IEC Flange:

B5

Lubricant: Artificial&Mineral

1. Q: What info should I notify you to confirm the worm gearbox?
A: Product/Measurement, B: Ratio and output torque, C: Electricity and flange kind,
D: Shaft Direction, E: Housing shade, F: Purchase quantity.
 
two. What kind of payment methods do you settle for?
A: T/T B: B/L C: Funds

three. What’s your warranty?
One yr.
 
four. How to supply?
A: By sea- Buyer appoints forwarder, or our revenue team finds suited forwarder for customers.
By air- Buyer provides gather convey account, or our revenue staff finds suitable convey for consumers. (Primarily for sample)
Other- We organize to provide merchandise to some spot in China appointed by consumers.
 
five. Can you make OEM/ODM purchase?
Sure, we have prosperous encounter on OEM/ODM buy and like sign Non-disclosure Arrangement just before sample producing

/ The use of authentic gear manufacturer’s (OEM) part quantities or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our firm and the detailed substitute parts contained herein are not sponsored, accredited, or created by the OEM. /

0.12kw~15kw  worm and worm wheel steering gear animation  shop  China  in Amara Iraq  Wpwo Vertical Shaft Type Worm Gearbox with top quality