Tag Archives: China worm gear speed

China Best Worm gearbox manufacturer supplier & factory Wholesale Nmrv075 Series Right Angle Worm Gear Speed Reducer Bipolar Reducer Small Transmission Gearbox with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Wholesale Nmrv075 Series Right Angle Worm Gear Speed Reducer Bipolar Reducer Small Transmission Gearbox with top quality best prices

We – EPG Team the largest worm gearbox, couplings and gears factory in China with 5 different branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Products Attributes
one. Mad of higher-high quality aluminum alloy,gentle bodyweight and non-rusting
two. Large output torque
three. Clean in running and reduced in sound,can function prolonged time in dreadful conditions.
four. High in radiating effectiveness.
5. Good-bathroom ept in physical appearance,tough in provider existence and modest in volume.
six. Appropriate for omnibearing installation.
 

sort: Worm Equipment Velocity Reducer/ Gearbox
Model No.: NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150
Ratio: 5,7.5,10,15,20,twenty five,thirty,forty,fifty,60,80,a hundred
Colour: Blue(Ral5571)/Silver Grey (RAL9006) Or On Buyer Request
Material: Housing: Dimensions 25-one hundred ten Is Aluminum Alloy, Measurement one hundred ten-150 Is Solid-Iron
Worm Wheel: ZCuSn10Pb1
Worm:20Cr
Pinion:Tin Bronze
Output Shaft: Metal-45#
Usages: Industrial Device: Foodstuff Stuff, Ceramics, Chemical, Packing, Dyeing,Wooden working, Glass.
IEC Flange: IEC Normal Flange Or On Consumer Ask for

 

: Are you ept company or manufacturer ?

A: We are manufacturing facility.

Q: How lengthy is your supply time?

A: Generally it is 5-ten days if the merchandise are in inventory. or it is 15-twenty days if the items are not in stock, it is in accordance to amount.

Q: Do you supply samples ? is it cost-free or added ?

A: Sure, we could offer the sample for totally free charge but do not pay out the cost of freight.

Q: What is your terms of payment ?

A: Payment=1000USD, thirty% T/T in ept ,equilibrium just before shippment.
If you have yet another issue, pls truly feel free to contact us as under:

 

/ The use of authentic products manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our business and the listed substitute parts contained herein are not sponsored, accredited, or produced by the OEM. /

China Best Worm gearbox manufacturer supplier & factory Wholesale Nmrv075 Series Right Angle Worm Gear Speed Reducer Bipolar Reducer Small Transmission Gearbox with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Wholesale Nmrv075 Series Right Angle Worm Gear Speed Reducer Bipolar Reducer Small Transmission Gearbox with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Agricultural Machinery Gearbox Agriculture Tractor Machinery Parts 90 Degree Angle Pto Gearbox Worm Gear Speed Reducer with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Agricultural Machinery Gearbox Agriculture Tractor Machinery Parts 90 Degree Angle Pto Gearbox Worm Gear Speed Reducer with top quality best prices

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 various branches. For a lot more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Range Substance AvailableAlloy steel, Casting, die casting,Aluminum,Brass, Zinc alloy,POM,plastic,Stainless metal, Iron or for each
your desire.Machining ProcessingForging/casting TurningBroachingTeeth hobbing Tooth burnishingTeeth slotingTeeth grinding
Heating therapy GrindingAssemblyTesting.Warmth Treatmentcarbonitridingcarburizationnitridation vacuum quenchingfrequency
quenchingtemperingSurface TreatmentBlackeningOxidationelectrophoresisPowder coatingphosphorizationInspectionISO9001-2015
Certification one hundred% accountable for your orders.
1. High power of equipment box, gears and shafts, durable and durable
two. 2 metric output shaft bore diameters(Normal and Optional)
3. Optional backstop to prevent backdriving. Backstop is not suggested for the equipment ratio 5
4. Double lips skeleton oil seal brings together the capabilities of seal and dust-proof
5. Broadly utilized in belt conveyor and pulley drive program

 

/ The use of first products manufacturer’s (OEM) element numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our business and the outlined substitute areas contained herein are not sponsored, accredited, or created by the OEM. /

China Best Worm gearbox manufacturer supplier & factory Agricultural Machinery Gearbox Agriculture Tractor Machinery Parts 90 Degree Angle Pto Gearbox Worm Gear Speed Reducer with top quality best prices

China Best Worm gearbox manufacturer supplier & factory Agricultural Machinery Gearbox Agriculture Tractor Machinery Parts 90 Degree Angle Pto Gearbox Worm Gear Speed Reducer with top quality best prices

Worm baldor 5hp single phase motor wiring near me made in China – replacement parts – in Douala Cameroon Gearbox Gearing Reducer Nrv Worm Gear Speed Reducer Gearbox Hypoid Gear & Gearbox Replace of Worm Reducer and Gear Box with top quality

Worm baldor 5hp single phase motor wiring near me made in China - replacement parts - in Douala Cameroon Gearbox Gearing Reducer Nrv Worm Gear Speed Reducer Gearbox Hypoid Gear & Gearbox Replace of Worm Reducer and Gear Box with top quality

We – EPG Team the greatest worm gearbox, couplings and gears manufacturing unit in China with 5 different branches. For more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Worm Gearbox Gearing Reducer Nrv Worm Equipment Speed Reducer Gearbox Hypoid Gear & Gearbox Change of Worm Reducer and Equipment Box

 

/ The use of unique gear manufacturer’s (OEM) component figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our organization and the shown replacement parts contained herein are not sponsored, accredited, or produced by the OEM. /

Worm baldor 5hp single phase motor wiring near me made in China - replacement parts - in Douala Cameroon Gearbox Gearing Reducer Nrv Worm Gear Speed Reducer Gearbox Hypoid Gear & Gearbox Replace of Worm Reducer and Gear Box with top quality

Worm baldor 5hp single phase motor wiring near me made in China - replacement parts - in Douala Cameroon Gearbox Gearing Reducer Nrv Worm Gear Speed Reducer Gearbox Hypoid Gear & Gearbox Replace of Worm Reducer and Gear Box with top quality

New renold worm gear unit near me shop China in Indore India Product High Speed Ceiling T Grid Metal Forming Machine with top quality

New renold worm gear unit near me shop China in Indore India Product High Speed Ceiling T Grid Metal Forming Machine with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

1. Product detail:

Product size: H*W(MM)38×35; 38×24; 38×15; 32×24; 32×15; 28×24; 28×15 etc. Length: 3600/3660mm
Any size and any demand we can do as per customer’s drawing or sample.

⊙ Main Components(A—-F):
A(2 Uncoilers for GI& PPGI) + B(Main Machine Roll Former) + C(Automatic Punching& Cutting-off System) +D(Electric PLC control Cabinet) + E(2 Hydraulic standions) + F(Run-out Table)
⊙ Main Parameter:
Stations: 18-24 Stations
Speed: 20–25M/Min(6–7Pcs/Min)
Total Power: 21.2KW(4KW+2.2KW+15KW)
PLC brand: Siemens
Xihu (West Lake) Dis.n-Machine interface: Siemens
Installation length: 14.8M
Die/Mould Material: SKD11
Customer’s Logo: Ok
Anti-Fire Hole: OK
Stitching Line: Ok
Steel Head Lock: Ok
Transmission: Worm Gearbox Reducer
Main Hydraulic station with Accumulator for stable and precise performance

A: Uncoiler/Decoiler/Coil Opener/Raw Material Shelf:
Code: MT-200;
Weight: 100kg;
Size: 1000*800*1100(mm)
Raw Material Roll :
Inner Diameter: 450-530mm
Outer Diameter: 1200mm
Loading weight: 1000kg
Make sure the GI and PPGI
Unoiler in the exact line with
Main Former Machine

☆ Station/Pass/Pinion: 18 stations
☆ Speed: 20—25M/Min(6–7Pcs/Min)
☆ Machine body: Carbon Steel, Thickness 20mm, Polished, Rust Prevention Paint Protection,Any color available
☆ Transmission: Motor 4KW, Main Transmission: Chain Drive, Between Rollers: Worm wheel Gearbox
☆ Stitch: Four Rollers real stitch, can also be used for fake stitch.
☆ Side plate: Thickness 30mm, Polish 6 sides, high precision boring
☆ Principal Axis: 45# steel, tempering heat treatment, mill grinder precise making
☆ Electric Cabinet: SIENENS PLC programmed, Touch Screen, FullY Automatic controlling system.
☆ Punching Die: Material D11, Hardness HRC 58-60, Precise milled, precise making, easy to removable parts.
Stitching Mechanism
☆ Roller: Material Cr12 Inner diameter 39mm, Min OD 90mm, HRC 55-56, Symmetry in the range of 0.05mm

C Automatic Punching and Flying Cutting-off System:
Features:
☆ Punching Die: 24 sets( 2 head locks 22 Main Tee holes)
☆ Anti-Fire Hole Die Available on Machine
☆ Cutting: Flying Cutting-Off Contineous wor ept non-stop
☆ Driving Force: 2 Hydraulic stations one for Punching mechanism travel and one for punching
☆ Accurancy: Height and Width within 0.1mm; In Length 0.3mm/Meter
☆ Die Material: 45# steel and Cr12MoV, Heat treatment Vacuum 58–60HRC
☆ Cutting off Length: 3600 or 3660mm
☆ Hole Distance: 150cm or 6″
☆ Custom Logo Punching at same time on Machine Fully Automatic

D Electric PLC control Cabinet
Features:
☆ PLC brand: SIEMENS
☆ Xihu (West Lake) Dis.n-Machine Interface: SIEMENS
☆ Inverter: Teco ZheJiang brand
☆ Switch Power: Delta ZheJiang brand
☆ Wire connection interface: Aviation plug

E Hydraulic stations
Features:
☆ Hydraulic brand: LYHP
☆ Electromagnetic valve: XIHU (WEST LAKE) DIS. brand
☆ Accumulator: Nitrogen
☆ Main Hydraulic: 15KW
☆ Secondary Hydraulic: 2.2KW
☆ Color: Any color available

F Run-out Table
Features:
Size: 3800x750x970mm
Finish: polish
Material: Stainless Steel 304 the outward surface painted protection, Any color available
This compenent is wor ept desk. Product will drop onto the table and slide out smoothly, so it avoids scratching and easy for packing. And there are waste grooves upgrade to conduct the waste steel odd ends to the barrel.

Raw material supplying rack picture :

Roll Forming Machinery:

Flying Tracing Cutting System:

For more to visit our website:    

Below are Youtube video:
Company introduction:

Kaigui Machinery is just focusing on Ceiling T-grid Roll Forming Machine in China. Almost all Chinese T bar and T Grid Factories are using our machines or let us retrofit and upgrade their old machines. My boss Mr. Jiang  enjoys high reputation in this industry. In the export market.

Many ept companies are using our factory or picture to deceive customers internationally.We are gravely announcing here: Only ZheJiang Kaigui Machinery, my boss Mr. Jiang JunQing and Erin and website: are the real and true.

3. Customer come to our factory:

4. Why choose us:
 

  • T-bar roll forming machine mould processing and designing we are specialized and No. 1 in China
  • T-bar ceiling machine performance reaches to the optimum because we have our own Electric PLC engineer
  • Suspension ceiling T-bar machine we are just focusing and dedicated this kind machine for 15 years
  • Fully automatic T-bar ceiling roll forming machine we are the first producer and leading the technology in China

5. Package:

6. FAQ:

1) Q: Are you manufacturer or ept company?
A: We are manufacturer .
2) Q: Do you provide installing and training overseas?
A: Overseas machine install and worker training services are optional.
3) Q: How is your after sales support? 
A: We provide technical support on line as well as overseas services by skillful technicians. 
4) Q: How does your factory do regarding quality control? 
A: There is no tolerance regarding quality control. Quality control complies with ISO9001. Every machine has to past testing running before it’s packed for shipment. 
5) How can I ept you that machines pasted testing running before shipping?
A:  1) We record the testing video for your reference. Or,
    2) We welcome your visit us and test machine by yourself in our factory.
6) Q: Do you sell only standard machines?
A: No. All the machinery could be customized.

If any inquiry, pls feel free to contact us!!

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

New renold worm gear unit near me shop China in Indore India Product High Speed Ceiling T Grid Metal Forming Machine with top quality

New renold worm gear unit near me shop China in Indore India Product High Speed Ceiling T Grid Metal Forming Machine with top quality

R worm gears back driven wholesaler China in Bujumbura Burundi Series Helical Gear Speed Reducer Gearmotor with IEC Flange Input with top quality

R worm gears back driven wholesaler China in Bujumbura Burundi Series Helical Gear Speed Reducer Gearmotor with IEC Flange Input with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Cast Iron Material R Series Helical SEW Geared Motor without IEC Motor:
 

Housing material                                     HT200 high-strength cast iron from R37,R47,R57,R67,R77,R87                                                                         
Housing material     HT250 High strength cast iron from R97,107,137,147,157,167
 
Housing hardness HBS90-240
Gear material: 20CrMnTi
Surface hardnesss  of gear     HRC58°-62°
Gear core hardness HRC33°-40°
Input/Output shaft material           40Cr
Input/Output shaft hardness HBS241°-286°
Shaft at oil seal postion hardness HRC48 ° -55 °
Machining precision of gears  material Accurate grinding 6-5 grade
Heat treatment tempering, cementing, quenching etc
Efficiency Over 90%
Noise(Max) 60-68dB
Unit model Foot mounted,flange mounted
Input method flange input,inline input,shaft input
Vibration ≤20um
Backlash ≤20Arcmin
Bearing brands NSK,C&U etc
Oil seal brands NAK,SKF etc
Lubricant VG220
Motor IP55, F class
Motor shaft 40Cr, Tempering, cementing,quenching etc.  

 
1.Our Services

1.1.We provide 12 months Warranty.
1.2. We have thousands of gearbox reducers. From Input Power 0.06KW to 200KW, Ratio 1.3-289.74, Output speed 0-1095rpm and Output torque 1.4-62800Nm. They can meet your all different requirements for different industries.
1.3. We provide E-catalog or Paper catalog,so you can select the model easily according to your requirements 
1.4.You are welcome to visit our factory to check our products,we can help you to book the hotel or ticket
 
2.Company Information

2.1.Our Company:
The Predecessor for ZheJiang ept Drive CO.,Ltd (originally called HangZhou ept Transmission Machinery CO.,Ltd) State-owned military mould enterpriese which established in 1965.
 
ept is located in HangZhou,China and the factory covers an area of about 25000 square meters.
 
Production Capacity:more than half a million sets of speed reducer per year.

2.2.Our People: 
The company has a strong technical force. It has more than 400 employees at present, including more than 40 engineering technicians and 10 experts and senior engineers enjoying special allowances of the State Council. 
 
2.3. Our Certificates:
Passed ” ISO 9001 International Quality System Certificate”, “International Quality Credit AAA++ Ceritifacte” ,  ” Swiss SGS Certificate”, Iconic Brand in Chinese Electromechanical Industry”, “Famous Brand of ZheJiang Province”, “Non-public Scientific and Technological Enterprise in ZheJiang Province”, “National High and New-tech Enterprise”, “TOP 50 in Chinese Gear Industry” “2011 HangZhou Engineering and Technological R&D Center” and so on.

3. FAQ
 
Q:Are you a trading  company or manufacturer?
A: HangZhou ept Drive Co., Ltd previously was a State-owned ept Mold Factory, a state-owned military industrial enterprise established in 1965. It completed reform in 2002. Since reform, the company has developed rapidly. It took the lead in passing ISO9001 International Quality System Certificate and International Quality Credit AAA++ Certificate in 2004, and Swiss SGS Certificate in 2009. It has won such titles as “Iconic Brand in Chinese Electromechanical Industry”, “Famous Brand of ZheJiang Province”, “Non-public Scientific and Technological Enterprise in ZheJiang Province”, “National High and New-tech Enterprise”, and “Tope 50 in Chinese Gear Industry” successively

Q:Where do you base?
A: We are in HangZhou,ZheJiang ,China. We have two factories,New factory is in Xihu (West Lake) Dis. district,HangZhou,China and the old one is in CHangZhou District,HangZhou,China.

Q:What kinds of gearbox can you produce for us?
A:Main products of our company: JWB-X series mechanical continuously variable transmission, RV series worm gear reducer, B/JXJ cycloidal pin gear speed reducer, NCJ series gear reducer,  and R, F K, S series helical-tooth reducer (SEW), more than one hundred models and thousands of specifications.

Q:What are the application of the gearbox?
A:Products are widely used in ceramic, glass, food, metallurgy, beer & drink, printing and dyeing, textile, petrochemical engineering, warehouse logistics, wood-wor ept machine, environmental protection equipment, printing and packaging, pharmacy, and leather. Products are sold in some countries and regions, such as Europe, America, and Southeast Asia, and it possesses dozens of distributors and after-sale service agents.

Q:What is the material you use?

A1: Aluminum Housing body ( For the RV series worm gearbox Size 30~90)
   
A2: Cast iron(For the RV series worm gearbox, Size 110-150, For the NCJ  & F/R/S/K series helical gear reducer)

Our factory (ZheJiang ept Drive Co., Ltd.) is a  big and famous 6S standard Gearbox factory with around 380 employees since 1965 . We export to South Asia, Southeast Asia, Africa, Middle East, South America, North America, Europe…etc. We offer Gearbox to SIEMENS,ABB,SACMI,BUHLER,MODENA,KEDA…etc. Sincerely hope to establish a win-win business relationship with you.

Expecting to talk about more details with you ! 

Best Wishes

Jacky 
Factory: ZheJiang ept Drive Co., Ltd. (Previous name: HangZhou XingGuang Transmission Machinery)
Add: No.10,Xihu (West Lake) Dis.n Industrial Park, Baini Town, Xihu (West Lake) Dis. District, HangZhou City, ZheJiang Province, China. 
Tel : 0086~13083988828 1385811777857175253 ; 
Web: cn ;

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

R worm gears back driven wholesaler China in Bujumbura Burundi Series Helical Gear Speed Reducer Gearmotor with IEC Flange Input with top quality

R worm gears back driven wholesaler China in Bujumbura Burundi Series Helical Gear Speed Reducer Gearmotor with IEC Flange Input with top quality

High make worm gear drive factory China in Matola Mozambique Speed Stainless Steel Automatic Slitting and Rewinding Machine with top quality

High make worm gear drive factory China in Matola Mozambique Speed Stainless Steel Automatic Slitting and Rewinding Machine with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

HIGH-SPEED STAINLESS STEEL SLITTING MACHINE LINE

Specification
&
Parameter
                    
 

 

  • :Coil main specification
  1. Coil material: Stainless steel.
  2. Coil thickness:0.3~3.0mm..
  3. Coil width:300~1500mm.
  4. Coil I.D.:Φ508mm.Φ610mm(With Cover).
  5. Coil O.D. (max) :≤Φ1800mm.
  6. Coil weight (max):≤20T.
  7. () Line total area (about):28M×9M.
  8. :.Feed-in direction:From right to left.
  • Equipment composition:

Paper machine-Hydraulic Uncoiler Car-Hydraulic Uncoiler- Hydraulic bracket-Feeding guide plate-,Pinch roller with Coil head cutting machine-Front looping table-)()Side guiding (laminating device)-Disc shear-Curling machine-Back looping table-Tension table-Coil divided shearing machine-Recoiler-Hydraulic bracket-Hydraulic recoiler Car-Hydraulic Station System-Electrical Control System,Pneumatic System

  • :Slitter main specification
  1. :
  1. :,,.

Operation function: use for collecting packing paper in coil.When need collection paper, put paper tube and turn over several circle.

  1. :.,.

Structure : double saddle steel welded .Controlled by torque motor.

  1. :Hydraulic Uncoiler Car/
  1. :.Structure:Steel welded.
  2. :.Type:Driven by 4 wheels.
  3. :.Transmission power:Gear reduced motor.
  4. :.Lifting power:Hydraulic oil cylinder.
  5. :20T.Max loading weight:20T
  1. :Hydraulic decoiler
  1. ,,,,37KW.Form by bracket,guide seat,hydraulic expanding axis ,hydraulic oil cylinder ,37KW D.C. motor and so on.
  2. :4.,.Axis structure: form by 4 pieces of wedge slider.Reel is hydraulic powered and expands coil.
  3. ,,..Decoiler has DC motor so that it could decoil with pinching machine, and avoid spreading because of rotated inertia. Decoiler uses pneumatic disc type brake to work with follow-up machine line speed and have fast brake when outage.
  4. ,,,..Decoiler has fixed pressing fitting, pressing wheel  has PU notch so that convenient to pull out pac ept band and decoil.Pressing wheel is controlled by oil cylinder to lift.
  5. Expanding range:Φ470mm~Φ530mm.
  1. Hydraulic bracket:
    1. :.Structure:steel welded.
    2. :.Bracket power:Hydraulic cylinder.
  2. Feeding guide plate:
  1. .Form by flexible feeding guide plate with driving cylinder.
  2. ,.,.,.Assist decoiling and sending material so the head of coil could enter into pinching machine.Xihu (West Lake) Dis. plate extends and lifts to a suitable place,guiding head of coil. Plate lifting, stretching is driven by oil cylinder.
  1. ,:Pinch roller with Coil head cutting machine
  1. : ,.Structure and type:Pair roller pinching, steel welded.
  2. pair rollers size:Ø250mm×1600mm,2pcs. Roller surface with PU.
  3. :.pressing type:driven by hydraulic oil cylinder
  4. :37KW,.Driving power:37KW D.C. motor,and gear box.
  5. :,,,,,.Structure: form by wallboard,upper and down tool apron and blade,gap adjusting mechanism,synchronous shaft,synchronous gear,hydraulic oil cylinder and so on.
  1. :Front looping table
    1. :..Type:steel plate welded with channel.Oil cylinder controls platform upper and down.
  2. :Side Xihu (West Lake) Dis.(laminating device)
  1. :,,,.Structure:form by vertical guiding roller,slider,width adjusting mechanism,pinch roller and transmission mechanism.
  2. :Φ70×170mm,6,,.Vertical roller size:Φ70×170mm,6 pieces,surface quenching,chrome-plate.
  3. Pinch roller size:Φ180×1600mm. Roller surface with PU.
  4. :.Pinch roller lifting power:Hydraulic oil cylinder.
  5. :.Pinch roller power:Gar reduced motor
  6. :.Deviation-rectify adjustment:Single side manual adjusting with two rods.
  7. :300~1500mm.Adjusting range:300~1500mm
  8. ,.

Covering membrane to coil according to request, complete by two-pinching rollers pressing when covering

  1. ,.

Laminating fitting is use special unfolded roller with pinching rollers. It could let membrane cover on steel plate uniformly.

  1. Disc shear:
  1. :,,,,,.Structure and type:form by arch,upper arbor lifting worm wheel box,gear reduced motor ,universal coupling,machine base,power gear box and so on.
  2. :Φ220×1600mm().Shearing axis size:Φ220×1600mm(blade installation place).
  3. :42CrMo,.Shearing axis material:42CrMo,intermediate frequency quenching.
  4. :90kw.Shearing power:90kw DC motor.
  5. :.Shearing pressing power:Gear reduced motor.
  6. :.Blade changing type:Hydraulic oil cylinder push back arch.
  7. :0~150m/min.Shearing speed:0~150m/min adjustable.
  8. :Φ220×Φ350×10mm.Blade size:Φ220×Φ350×10mm,10pcs.
  9. Blade shim size:Φ220×Φ260mm.
  10. :<1mm  25 ,3mm 5.

       Slitting strip quantity: <1mm 25PCS, 3mm 5PCS.

  1. :Curling machine:
  1. :.,,,;,.Type:rotating disc type.Form by motor,helical worm geared reducer,rotating disc,base and so on;Infinitive speed to make same with disc shear.
  2. Curling speed:0~150mm/min.
  3. Recoil disc size:Φ365×600mm.
  4. :3-10mm.Edge wire width:3-10mm single side.
  5. :.Recoil disc power:AC Motor with helical worm geared reducer.
  6. :.Material removal type:Oil cylinder push recoil disc contraction.
  1. :Back looping table:
  1. :..Type:steel plate welded with channel.Controlled by oil cylinder to lift.
  1. :Tension table
  1. :,,.Function:front separator separates the coil in recoiler in advance,at the same time coil bring back strain,so that it is convenient to recoil tight.
  2. :,,,,.Structure:Form by arch, upper and down tension plate, synchronous shaft, oil cylinder, base and so on.
  3. Pre-feeding axis size:Φ100×1700mm.
  4. :Φ200×3mm,65Mn,.Pre-feeding slice size and material:Φ200×3mm,65Mn, quenching treatment.
  5. :,.Tension Controlling:Oil cylinder pressing type tension fitting, press through hydraulic decompressed valve.
  1. Coil divided shearing machine:
  1. :.,.,,,.

Function: shearing coil to reach dividing function according to need. When it reaches the length of strips, manual operation button controls shearing and driving cylinder to cut coil. After divided shearing, it has device of speed and length measurement, offers signal to control machine line speed, and show on the screen of controlling table, provide a basis for dividing coils.

  1. :,,,,,,.
    Coil divided shearing structure: hydraulic upper shearing type. form by wallboard,upper and down tool apron and blade,gap adjusting mechanism,synchronous shaft,synchronous gear,hydraulic oil cylinder and so on.
  2. :Ø400×1700mm,.Balanced measuring roller size:Ø400×1700mm,chromeplate .
  1. :Recoiler
  1. :,,,..,..Function:separate the slitted coil and recoil,reel use DC adjusted motor to drive rotating.Clamping block is hydraulic expanding structure.Hydraulic cantilever type coil separator could enlarge when rise ,could press tightly all the time.Have pneumatic fast-brake fitting.
  2. ::,,,.Structure:cantilever type coil separator: form by cantilever, separator slice, separator distance sleeve and separator axis.Oil cylinder offers power to lift.
    1. :,.Coil rolling machine:form by motor,reduced box and reel.
    2. Rolling I.D.:Φ508mm.
    3. :20T(MAX).Rolling weight:20T (MAX).
    4. :.Rolling type:Upper-rolling.
    5. :.Clamping block:Oil cylinder expanding fitting.
    6. :144KW.Driving power:144KW DC motor.
  3. :0~150m/min.Rolling speed:0~150m/min adjustable.
  4. :.

Pushing material fitting: push by hydraulic cylinder and two assistant pushing rods.

  1. :Hydraulic recoiler Car
  1. :.Structure:Steel plate welded with channel.

 

  1. :.Transmission power:Gear reduced motor.
  2. :.Lifting power:Hydraulic oil cylinder.
  3. : 20T.Max loading weight:20T.
  1. :Hydraulic bracket
  1. :.Structure:Steel welded.
  2. :. Bracket power:Hydraulic cylinder.
  1. Hydraulic Station System
    1. :,,.Summary:Hydraulic system is formed by hydraulic station and related pump,valve,pipes.
    2. :Specification
      1. Pressure:10Mpa
      2. Flow/:27L/min
      3. :N46

Wor ept medium:N46 Antiwear hydraulic oil.

      1. Gasoline tank capacity:500L
      2. Motor:7.5KW
  2. Air pressure system:
  1. :,,,.

   Summary:Form by air supple, air supple element, magnetic valve, and related pipes, cylinder

  1. Specification/           

air pressure/        0.6~0.8Mpa
              Air-feeding quantity             1/min()
1 cube/min (under compressing condition)
             

  1. :Electrical Control System/

       ,,320KW;:380V,50Hz.
One set of Electric cabinet,two sets of operation cabinet,machine installing capacity 320KW;power supple:380V,50Hz.
 

No. Name Place of origin
1 PLC ZheJiang Delta:DVP-(32EH)
2 ()
Man-machine interface(touch screen)		 KunLun TongTai
3 Encoder HAIDE
ZSF6.215-102CW-1571BZ3K24F
4 DC controller England Eurotherm:590C
5 Electric element Schneider

 

6 DC speed governing motor Pioneer motor
7 Gear Reducer Motor ZheJiang Tunglee
8 Key part bearing HangZhou bearing,HangZhou bearing,HangZhou bearing
9 gear box seal ZheJiang Speedy International Company
10 Hydraulic system element ZheJiang Hydraulic Factory

 

  1. Buyer preparing/
  1. .Electricity master switch/
  2. ,.Oil of gear box and hydraulic pressure/
  3. . Air supple

Main Xihu (West Lake) Dis.llary Products Producing Company

  1. Manufacturing shop/Xng sn xut
  1. 28.

Producing line length is about 28 meter.

  1. :34()×10()×6().

Manufacturing shop area should be minimum: 34M (L)*10M (W)*6M (H)

  1. 20.

You should have one set of crane which could load over 20T and other corollary equipments in manufacturing shop.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

High make worm gear drive factory China in Matola Mozambique Speed Stainless Steel Automatic Slitting and Rewinding Machine with top quality

High make worm gear drive factory China in Matola Mozambique Speed Stainless Steel Automatic Slitting and Rewinding Machine with top quality

Flange how to make a worm gear in solidworks wholesaler China in Khartoum Sudan Connection Mounted Cycloidal Double Stage Speed Reducer with top quality

Flange how to make a worm gear in solidworks wholesaler China in Khartoum Sudan Connection Mounted Cycloidal Double Stage Speed Reducer with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

1.Product features

1.1. B/JXJ series cycloid pin wheel reducer the principle of planetary drive with small teeth difference and the new struction of cycloid gear meshing with pin wheel
1.2. Big Ratio:the max ratio of single stage is 87 and double stage is 7569,three stage is 658503
1.3. High efficiency:80% to 85%
1.4. Compact structure,small volume:volume or weight can be reducer by 1/2 compared with the ordinary reducer with same ratio and power
1.5. Stable transmission,low noisse,long life time
1.6. Use for obverse or reverse rotation

2. Technical parameters

Technical parameters: -High speed ratio and efficiency:
1)Single stage: 11,17, 23, 29, 35,43, 59,71,87
2) double stage: 121, 187, 289, 385, 473, 595
 

Model B/JXJ cycloid pin wheel reducer
Base No.Single Stage 0#—6#(single stage),10#—-63#(doubel stage)
Colors Blue or OEM colors
Input Power 0.37-30KW
Ratio 9-87(single stage),81-7569(double stage)
Output Torque 16.96-7100Nm
Maint parts Base,output shaft,cycloid gear,gear pin,gear roller,output shaft ring
Maint parts material GCr15
Lubrication 40# machine oil/CKC460 industrial oil
Efficiency 80%-85%
Rotation Obverse or reverse rotation

 

  
1.Our Services

1.1.We provide 12 months Warranty.
1.2. We have thousands of gearbox reducers. From Input Power 0.06KW to 200KW, Ratio 1.3-289.74, Output speed 0-1095rpm and Output torque 1.4-62800Nm. They can meet your all different requirements for different industries.
1.3. We provide E-catalog or Paper catalog,so you can select the model easily according to your requirements 
1.4.You are welcome to visit our factory to check our products,we can help you to book the hotel or ticket
 
2.Company Information

2.1.Our Company:
The Predecessor for ZheJiang ept Drive CO.,Ltd (originally called HangZhou ept Transmission Machinery CO.,Ltd) State-owned military mould enterpriese which established in 1965.
 
ept is located in HangZhou,China and the factory covers an area of about 25000 square meters.
 
Production Capacity:more than half a million sets of speed reducer per year.

2.2.Our People: 
The company has a strong technical force. It has more than 400 employees at present, including more than 40 engineering technicians and 10 experts and senior engineers enjoying special allowances of the State Council. 
 
2.3. Our Certificates:
Passed ” ISO 9001 International Quality System Certificate”, “International Quality Credit AAA++ Ceritifacte” ,  ” Swiss SGS Certificate”, Iconic Brand in Chinese Electromechanical Industry”, “Famous Brand of ZheJiang Province”, “Non-public Scientific and Technological Enterprise in ZheJiang Province”, “National High and New-tech Enterprise”, “TOP 50 in Chinese Gear Industry” “2011 HangZhou Engineering and Technological R&D Center” and so on.

3. FAQ
 
Q:Are you a trading  company or manufacturer?
A: HangZhou ept Drive Co., Ltd previously was a State-owned ept Mold Factory, a state-owned military industrial enterprise established in 1965. It completed reform in 2002. Since reform, the company has developed rapidly. It took the lead in passing ISO9001 International Quality System Certificate and International Quality Credit AAA++ Certificate in 2004, and Swiss SGS Certificate in 2009. It has won such titles as “Iconic Brand in Chinese Electromechanical Industry”, “Famous Brand of ZheJiang Province”, “Non-public Scientific and Technological Enterprise in ZheJiang Province”, “National High and New-tech Enterprise”, and “Tope 50 in Chinese Gear Industry” successively

Q:Where do you base?
A: We are in HangZhou,ZheJiang ,China. We have two factories,New factory is in Xihu (West Lake) Dis. district,HangZhou,China and the old one is in CHangZhou District,HangZhou,China.

Q:What kinds of gearbox can you produce for us?
A:Main products of our company: JWB-X series mechanical continuously variable transmission, RV series worm gear reducer, B/JXJ cycloidal pin gear speed reducer, NCJ series gear reducer,  and R, F K, S series helical-tooth reducer (SEW), more than one hundred models and thousands of specifications.

Q:What are the application of the gearbox?
A:Products are widely used in ceramic, glass, food, metallurgy, beer & drink, printing and dyeing, textile, petrochemical engineering, warehouse logistics, wood-wor ept machine, environmental protection equipment, printing and packaging, pharmacy, and leather. Products are sold in some countries and regions, such as Europe, America, and Southeast Asia, and it possesses dozens of distributors and after-sale service agents.

Q:What is the material you use?

A1: Aluminum Housing body ( For the RV series worm gearbox Size 30~90)
   
A2: Cast iron(For the RV series worm gearbox, Size 110-150, For the NCJ  & F/R/S/K series helical gear reducer)

Our factory (ZheJiang ept Drive Co., Ltd.) is a  big and famous 6S standard Gearbox factory with around 380 employees since 1965 . We export to South Asia, Southeast Asia, Africa, Middle East, South America, North America, Europe…etc. We offer Gearbox to SIEMENS,ABB,SACMI,BUHLER,MODENA,KEDA…etc. Sincerely hope to establish a win-win business relationship with you.

Expecting to talk about more details with you ! 

Best Wishes

Jacky 
Factory: ZheJiang ept Drive Co., Ltd. (Previous name: HangZhou XingGuang Transmission Machinery)
Add: No.10,Xihu (West Lake) Dis.n Industrial Park, Baini Town, Xihu (West Lake) Dis. District, HangZhou City, ZheJiang Province, China. 
Tel  0086~13083988828 1385811777857175253 ; 
Web: cn ;

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Flange how to make a worm gear in solidworks wholesaler China in Khartoum Sudan Connection Mounted Cycloidal Double Stage Speed Reducer with top quality

Flange how to make a worm gear in solidworks wholesaler China in Khartoum Sudan Connection Mounted Cycloidal Double Stage Speed Reducer with top quality

F worm gear solidworks shop China in London United Kingdom Series Parallel Shaft Helical Cast Iron Speed Reducer with top quality

F worm gear solidworks shop China in London United Kingdom Series Parallel Shaft Helical Cast Iron Speed Reducer with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

F Series Parallel Shaft Helical Cast Iron Speed Reducer

Feature:
1. Highly Standard Modular Designed
The products are easily connected with and driven by different types of motors or other kinds of input power. The same type geared motor can be adapted to optioned powers of motors. It’s therefore easy to realize different solutions for varied requirements.
2. High strength, Compact dimension
Housings are made of high strength cast iron. Gears and shaft gears are finished with gas carburising process and precise grouding to sequentially get high loading capacity of percertain volume.
3. Long service life
Under the condition of accurately selection type size and the normal maintenance and use, main components(expect those easily-disabled parts)can last as long as up to more than 25, 000hours. Easily-disabled parts include lubricating oil, oil seals, and bearings.
4. Low noise
All key components are finished by precisely machining, accurate assembly, and finally tested, and therefore, fairly low noise is reached.
5. High efficiency
The efficiency of gear unit can reach 95%, The efficiency of worm gear unit can reach 89%.
6. Large radial loading ability
7. Axial load ability of up to 5%of radial load
8. Mounting Arrangemnet
No strict limitation to the mounting arrangement.
9. Ratio
Featured many closely divided ratios and wide range of them. Very big final ratios can be obtained through combined unites to reach extremely low output speeds.
 

F(-)
 		 F(F) The out-put In-put F(-)
 Foot-mounted Flange-mounted Solid out-put or Hollow out-put Solid in-out shaft, or In-put flange Foot mounted solid shaft output

Input power rating and maximum torque:

Size
 		 38 48 58 68 78 88 98 108 128 158
Structure
 		 F      FA           FF          FAF        FAZ  
Input
power
rating		 0.18~3.0 0.18~3.0 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.1~30 2.2~45 7.5~90 11~200
Ratio 3.81~
128.51		 5.06~
189.39		 5.18~
199.70		 4.21~
228.99		 4.30~
281.71		 4.20~
271.92		 4.68~
276.64		 6.20~
255.25		 4.63~
172.33		 12.07~
270.18
Maximum
torque(N.m)		 200 400 600 820 1500 3000 4300 7840 12000 18000

Gear unit weight

Size
 		 38 48 58 68 78 88 98 108 128 158
Weight
 		 13 18 34 55 90 150 260 402 700 950

The weights are mean values, only for reference.
Maximum torque means the biggest one of the maximum torque related to the different ratio for the specified size.

Technical Data:

Rated Power
 		 0.18KW~200KW
Gear Arrangement
 		 Parallel Helical Hardened Gearbox
Rated Torque
 		 Up to 18000N.m
Input Speed 50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Ratio
 		 3.81~281.71
Output mode hollow shaft output or solid shaft output
Average efficiency 2-stage 96%, 3-stage 94%, combination 85%

Pac ept & Delivery:

Our company :
AOKMAN® was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with a strong presence in the international market.
AOKMAN® has become a reliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.

Customer visiting:

Our Services:

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

If you have any demand for our products please feel free to contact me.  

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

F worm gear solidworks shop China in London United Kingdom Series Parallel Shaft Helical Cast Iron Speed Reducer with top quality

F worm gear solidworks shop China in London United Kingdom Series Parallel Shaft Helical Cast Iron Speed Reducer with top quality

High globoid worm gear fusion 360 manufacturer China in Macao China, Macao SAR Speed Hand Feed Die Cutting Machine with Stripping with top quality

High globoid worm gear fusion 360 manufacturer China in Macao China, Macao SAR Speed Hand Feed Die Cutting Machine with Stripping with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

MY 1200EP/1300EP/1500EP semi-automatic die cutting and creasing machine

  • Specifications:
Model Unit MY1200EP MY1300EP MY1500EP
Max. Paper Size mm 1200*780 1300*960 1500X1100
Min. Paper Size mm 350*350 400*410 540X410
Max. Die-cutting Size mm 1180*760 1280*940 1480X1080
Max. Speed sh/h 0-5500 0-5500 0-4500
Max. Wor ept Pressure T 300 300 300
Max. Paper Thickness mm 1-7 1-7 1-7
Die-cutting Precision mm ±0.5 ±0.5 ±0.5
Total Power KW 15 15 19
Total Weight KG 14500 16000 19000
Overall Dimension mm 7730*4230*2345 8250*4530*2345 8750*4795*2405
  • Features of the machine:

Main Features:

  • The Bobst type cut structure makes the cutting platform movement like a scissor, it will realize a full and easier cut.
  • Main worm gear uses alloy copper material, after the experienced operator’s manual scraping treatment and strict standard testing, it can ensures the driving parts 10 years life.
  • The main chains adopt imported British Renold brand, the differences of 10 chains are less than 0.2mm.
  • The connect between gear box and driving shaft adopts sleeve and pin structure ensuring a strong connection.
    • Speed:  

The machine adopts frequency controller to achieve stepless speed acceleration which can reach to 4500 times per hour. During actual production, it can generally run at 3800 to 4300 times per hour according to the quality of the board. If the quality of the paper is good, a good operator even can operate the machine at over 4300 times per hours.

  • Safety:

As it is shown in the picture of the machine, the machine adopts rear part paper feeding method which keep the operator away from the die-cutting part. The mounting and adjustment of the die plate is also done outside of the die-cutting part with sensors and detectors at die-cutting part to ensure that the machine can not be started when the die-cutting plate is at adjustment status.
Besides the sensors at die-cutting part, there are sensor or approach switches at window part to make the whole machine at monitoring status to ensure its safety.

  • Operation convenience:

There is Man-machine interface installed in the control panel which will shows the safety status of the machine as well as malfunctions to facilitate the operator. Camera is also installed in front of the operator for him/her to monitor the operation status at the delivery part.

  • Main Structures and Key Material Used
  • Four Main Big Parts:

They are referring to: bottom station, moving platform, upper platform and machine wall. The bottom station is made of gray cast iron -HT 200; the moving platform is ductile iron – QT 42-10 and the machine wall is high quality A3 steel.

  • Main Drive:  

 

The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear forms a moving set to ensure stable pressure out put of not less than 300 tons.
 

The material for the worm shaft is 40Cr with quenching treatment and gear hardness HRC 45-50. The material for the worm is copper alloy – ZQAL9-4.
The bearing that is used is SKF. The bush is copper alloy ZQSn6-6-3.

  • Die-cutting and Creasing Part:

The drive is transferred via crank rod to pendulum which will bring the moving platform to move up and down to reach die-cut and creasing purpose.
The pendulum is made of high quality ductile iron. The pendulum axis is done by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely follow the specification of 1080 type automatic die-cutting and creasing machine. Compared with automatic die-cutting and creasing machine which is used for cardboard die-cutting, this type of semi-automatic die-cutting and creasing machine is mainly used for corrugated board which needs less pressure for die-cutting, in this case quite some producers have made smaller width on the pendulum and smaller diameter on the pendulum shaft. We keep wider pendulum and bigger diameter on its shaft to make our machine last for a longer life.
The die-cutting plate uses 7 mm 75 Crl plate which has more hardness and life span than the manganese plate.  

  • Board Conveying:

 

It adopts 3-cam intermittent positioning device to ensure the boarding conveying accurate and stable.
The machine uses gripper bar type with 12A long joints chain which is less in weight and less shock to the intermittent device under the precondition to ensure the strength of the chain. The brand of the chain is Renold U.K with high precise and quality. .    
The Gripper bar adopts aviation aluminum with three bridge type- light in weight and high in strength.

  • Electric Part

 

The electrical parts are designed and assembled according to the European CE standard and uses world wide known brand products.

  • Installation of Die

The die mounting and dismounting adopts side withdrawing ways which time saving and easy for operation.
There are two ways for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
The chase loc ept is pneumatic which is simple, convenient and reliable.

  • Special Characters of Our Machine:
    • Clever And Special Front Lay Design:

Compared with the card board sheet, the corrugated board has more strength. If the corrugated board abnormally reaches to the front lay, it will damage the front lay and the gripper bar when the front lay reaches to its highest position.
Generally the producers will install sensors on this part to stop the machine when the paper is fed abnormally to the front lay. However, when the machine is running at the high speed, the inertia will bring the machine to run for a while to make the front lay to its highest point and then also damage the front lay and the gripper bar.
Our special design is that when the abnormal board feeding happens and being detected, the front lay can never reaches to its highest point which makes free from front lay and gripper bar damages because of abnormal paper feeding.
As it is our special design, so there is no picture to be shown here.

  • Optional Delivery Platform:

According to the requirement of the client we can do the delivery platform either square type or E type (as shown in the picture) . If the client has enough pallets, he can choose square type. If the client does have enough pallet, he can choose, E type platform for which will also provide 4 delivery trolleys.

  • Pneumatic Pre–loading and Lifting Step Unit:

The preloading device is pneumatic driven. When one paper size is set, when you do other pile of preloading, there is no bother of you to reset the preloading device, you can just press the button and the machine will do for you.
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.

  • Dancing Roller Feeding:

Quite some of the die-cutting machine producers use direct feeding method which is the operator will feed the board directly to the mouth of the gripper. What we have found that the feeding time to the gripper is only 0.3 seconds which makes the board feeding work hard and inaccurate.
Our machine uses an additional dance roller feeding system whose board feeding time can be extend to 0.6 second. Together with the conveying parts it makes an easier work of the operator and faster in efficiency of the machine.
For example:  If an operator operates the direct feeding semi-automatic die-cutting machine at 3300 sheets per hour, he can easily operate our machine at 3700 – 4000 sheets per hour.

  • Conveying Part:

 

The board received by the dance roller will go through a conveying part with belt conveying and belt pressing which makes the board being pressed before reaching to the front lay.
Before the board reaches to the front lay, he will be repositioned by the side lay.
By these ways, the board conveyed by the dance roller will be more accurate and stable when they reach to the gripper bar.
There is also detector to detect the status of the board. If board does not come to the front lay at normal position, the detector will send signals to stop the machine.

  • Stripping Part
    • Stripping is half striping which can strip off three – edge waste of the board.
    • There are upper chase, middle chase and lower chase where the male, elastic block and female die are placed to strip off the waste.

 
 
 

  • Configurations:

 

Name Brand and Origin Remarks
Bearing SKF Swiss Key part
IKO Japan or HangZhou, China Not key part
Chain Renold U.K; Main Chain ( Discrepancy of less than 0.2 mm for per 10 chains of machine chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France		  
Photo Electric Switch Fotek ZheJiang  
Stabilizer MEANWELL ZheJiang  
Variator Delta ZheJiang  
Main Motor Siemens Joint Venture
PLC Delta, ZheJiang  
Man-machine Interface Delta  
Pneumatic Parts Sunrise, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and delivery CPG ZheJiang  

 
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

High globoid worm gear fusion 360 manufacturer China in Macao China, Macao SAR Speed Hand Feed Die Cutting Machine with Stripping with top quality

High globoid worm gear fusion 360 manufacturer China in Macao China, Macao SAR Speed Hand Feed Die Cutting Machine with Stripping with top quality

K worm gear for sale davao near me China in Almaty Kazakhstan Series Helical Bevel Gear Motor Reducer High Quality High Quality Speed Variator Helical Gear Box Transmission with top quality

K worm gear for sale davao near me China in Almaty Kazakhstan Series Helical Bevel Gear Motor Reducer High Quality High Quality Speed Variator Helical Gear Box Transmission with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/

Product Description

K series gear reducer/ gearbox motor gearbox electric motor with reduction gear micro cycloidal gearbox transmission gear box

 

SLK series gearbox is one kind of Helical Bevel type gearbox , High-stainless cast iron case . ,it is designed based on modularization , which bring many difference kinds of combinations ,mounting types ,and structure designs .The detail classification of ratio can meet various of wor ept condition .High Transmission efficiency ,Low energy consumption, superior performance . The hard tooth surface gear use the high quality alloy steel , the process of carburizing and quenching, grinding ,which give it follow characters : Stable transmission , low noise and temperature ,high loading ,long wor ept life. which widely use for ept equipment of metallurgy ,Building Material , Chemical , Mining , Oil, Transportation , Paperma ept , Sugar ma ept , engineering Machines ,etc

 

Specifications:

1) Output speed: 0.6~1,571r/min

2) Output torque: up to 21700N.m

3) Motor power: 0.12~200kW

4) Mounted form: foot-mounted and flange-mounted mounting

 

Product Name SLK Series  Rigid Tooth  helical bevel reducer 
Gear Material 20CrMnTi 
Case Material HT250
Shaft Material  20CrMnTi
Gear Processing Grinding finish by HOFLER Grinding Machines
Color Customized
Noise Test 65~70dB
Efficiency 94%~98% (depends on the transmission stage)
Lubricating oil Shell Omala synthetic oil or mineral oil , or similar brand
Heat treatment tempering, cementiting, quenching,etc.
Brand of bearings C&U bearing, ZWZ,LYC, HRB, SKF,NSK and so on
 Brand of oil seal NAK or other brand
 Temp. rise (MAX) 40 °
 Temp. rise (Oil)(MAX) 50 °
Vibration ≤20µm

Company information 

Established in 1985, SANLIAN TRANSMISSION MACHINERY CO., LTD is a high and new technology enterprise engaging in research, develop and manufacture for reducer & speed variator, one of the director member of China Reducer Association of China General Machinery.
It covers more than 40,000 square meters, has more than 400 staff , 20% of whom are technicians, equipped with more than 300 sets the most advanced accurate numerical control equipment, including German HOFLER forming gear grinding machine to improve quality.
set up more than 30 national sales branches to serve our customers in time and thoroughly.
Our products also exported to more than thirty countries main in Europe, Asia  America, and Africa, with high reputation.

Quality control

Packing&Delivery

 Pac ept Details: Standard carton/Pallet/Standard wooden case

 Delivery Details : 15-30 wor ept days upon payment


Related Product

Precision Planetary gearbox Robot RV gearbox speed reducer
Custom made Non-standard Gearbox UDL Series Variator
PYZ Series Helical Tooth Shaft Mounted Reducer 8000 Series Cycloidal Reducer
SLT Series  Spiral Bevel Gearbox SLSWL Series Worm Screw Jack
SLP Series Planetary Reducer SLH/SLB Series High Power Reducer
NMRV Series Worm Reducer BKM Series Helical-hypoid Reducer
SLRC Series Helical Reducer SLSMR Series Shaft Mounted Reducer
SLXG Series Shaft Mounted Reducer X/B Series Cycloidal Reducer
SLR/SLF/SLK/SLS Series Helical Reducer AC/DC Motor

Main product list: 16 series including SLR/SLS/SLK/SLF series hard tooth flank gear reducer , SLRC series aluminium case helical gear reducers,SLH\SLB series high power speed reducer, SLP series planetary speed reducer, X/B series cycloidal reducer, SLXG series shaft-mounted gear box, SLSWL series worm screw jack, SLT series helical cone gear box, altogether more than 10,000 ratios, various specification make us at the head of domestic transmission industry, widely serve the mechanical transmission field of light & heavy ept such as: beer & beverage, mining machine, food packing, textile printing, rubber & plastic material, petrochemical industry, jack-up transportation, pharmacy & process hides, environmental protection equipment.


Certificate 

FAQ

1.Payment Term: TT, L/C

2.Delivery time: about  30 days from receive payment. 

3.We accept customized products as per your special requirement.

4.Xihu (West Lake) Dis.lines for the Selection:Usually we can select one machine which is suitable for you with some informations from you,such as ratio/motor speed/mounting dimension/ out torque etc. 

5.If the minimum order amount is in excess of $10000, there are preferential.
 

Q1: What information should I tell you to confirm the product?

A:Model/Size, Transmission Ratio, Shaft directions & Order quantity.

Q2: What can i do if I don’t know which one I need?

A:Dont worry, Send as much information as you can, our team will help you find the right one you are loo ept for.

Q3: What is your product warranty period?

A:We offer one year warranty since the vessel departure date left China.

 

Q4: Are you ept company or manufacturer ?

A: We are factory.

 

Q5: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

 

Q6: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

 

Q7: What is your terms of payment ?

A: Payment=1000USD, 30% T/T in ept ,balance before shippment.

 

If you have another question, pls feel free to contact us as below:

Contact Us

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

K worm gear for sale davao near me China in Almaty Kazakhstan Series Helical Bevel Gear Motor Reducer High Quality High Quality Speed Variator Helical Gear Box Transmission with top quality

K worm gear for sale davao near me China in Almaty Kazakhstan Series Helical Bevel Gear Motor Reducer High Quality High Quality Speed Variator Helical Gear Box Transmission with top quality